OneTigris TEGIMEN Hammock Hot Tent Review

on

Elevating Cold Weather Camping with Wood Stove Comfort

Camping in cold weather presents unique challenges, but the OneTigris TEGIMEN Hammock Hot Tent aims to provide a cozy solution. Equipped with two stove jacks, this tent allows for the use of small wood-burning stoves, ensuring warmth during chilly outdoor adventures. In this review, we'll dive into the setup experience and performance of the OneTigris TEGIMEN Hammock Hot Tent.

Setup Experience

I had set the tent up one other time as a test and seperately tested the stove twice outside of the tent.  This was the first test of the stove in the tent. 

I met up with my brother in law at his house and we worked on it together--he has some nice trees in his back yard and I wanted to test the setup using trees as supports rather than free-standing which I had to do in my back yard due to the lack of trees.  The two trees were about 70 feet apart but we managed to create a nice tight ridgeline.  We did use the two after-market  6' tent poles as support and they did help to keep the setup crisp and secure.

This second time, setup was 1 hour but we stopped to visit every so often and I went slow to consider several setup options.  With a few runs, I'm confident I can get it down to 30 minutes as a solo effort for most locations.

I chose to use two large trees for support. The choice of trees as supports added an extra layer of stability and showcased the tent's adaptability. While the two trees were 70 feet apart, the tight ridgeline, coupled with the use of two aftermarket 6' tent poles, ensured a secure and crisp setup.  It was very easy to make the ridgeline tight and the two support poles added to that easily.

The decision to utilize trees as natural anchors allowed for a different testing environment compared to the initial free-standing setup. Despite the greater distance between the trees, the tent proved versatile and maintained its structural integrity.
Vertical wall was easy

Support Structures and Vertical Wall Shape

Some users have reported the need for additional support sticks to achieve the desired "vertical wall tent shape." However, in this testing scenario, a tight ridgeline and secure support lines eliminated the necessity for extra support sticks. The tent maintained its form without trouble, highlighting its adaptability to different setup conditions.

Stove Testing

Having previously tested the wood-burning stove (the Winnerwell Fastfold Titanium Tent Stove), this review included the inaugural trial of the stove inside the tent. The two stove jacks facilitated efficient stove placement as they are close to each other.  I obviously only needed one and went with the vertical chimeny.   The setup allowed for a controlled and comfortable heat source within the tent.

During the latest round of testing, the wood-burning stove within the OneTigris TEGIMEN tent demonstrated impressive heating capabilities. Closing the flaps while allowing only a small amount of wood to burn revealed an immediate temperature increase. This initial trial sets the stage for more comprehensive cold weather testing, promising a toasty refuge during winter camping excursions.

We didn't measure the inside temp, but it was comfortable to even very warm.  The outside temperature was between 45-47 degrees F (7-8 deg C).  These initial trial sets the stage for more comprehensive cold weather testing.

Stove Jack Cover Concerns:  While the wood stove integration proved successful, an identified concern lies with the stove jack cover. The design, which involves rolling the cover up, poses a risk of gravity pulling it back down onto the hot chimney. This contact resulted in melting, necessitating replacement.

Suggestions for Improvement

As mentioned above, there were some concerns with te stove jack.  Here's some more details on the issue--I think there is a design flaw here,.  The outside flap rolls up and then gravity pulls it back down.  It does not fit snugly in place away from the chimney  

Beacuse of this, the roll of the stove jack cover fell down and touched the hot chimney--where it of course promptly melted.  It will need to be replaced.

Stove jack improvement suggestions
Stove jack
could use design
improvement

  • Reverse Roll Direction: Consider rolling the stove jack cover down instead of up. This adjustment aligns with gravity's natural pull, keeping the cover away from the hot chimney and mitigating the risk of melting.
  • Removable Cover: Make the stove jack cover entirely removable. Utilizing the existing velcro surround, a detachable cover allows for convenient removal and reattachment when not using the stove jack.
  • Enlarge the Cover: Increase the size of the stove jack cover to provide more distance from the chimney. A larger cover reduces the likelihood of accidental contact with the hot pipe.
  • Enhanced Ties: Implement three tight ties for the stove jack cover, ensuring a snug fit. This modification prevents the cover from descending onto the chimney, maintaining a safe distance.
I doubt I'll ever use this tent without the stove (it's not a "summer tent"--no windows) so I'll just make a new cover for it or otherwise remove the stove jack cover entirely.

Another suggestion--Internal Loops for Convenience

To enhance the tent's versatility, future designs could incorporate internal loops strategically placed inside the tent. These loops would allow campers to string a small line for hanging lanterns, clothing, or lightweight accessories, further personalizing the interior space.

Conclusion

The OneTigris TEGIMEN Hammock Hot Tent, with its wood stove compatibility, proves to be a game-changer in cold weather camping. While the stove integration showcases impressive heating capabilities, addressing the stove jack cover's design flaw and introducing internal loops for added convenience could elevate the tent's overall functionality. As winter approaches, the prospect of snug and warm camping experiences becomes increasingly enticing with the OneTigris TEGIMEN Hammock Hot Tent.

Equipment used

As always, these are not affiliate links, simply a link to the vendor that has the product--each link is to the vendor where I purchased that product.


Comments

Post a Comment